Accessories

Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

A healthful blend of vitamins, minerals and electrolytes provides healthy hydration on-the-go. - Naturally flavored with fruit oils and powders, and a touch of stevia leaf extract - Vitamin A, B Folate, B6, C, E, and D for health and wellness - Sodium, potassium, calcium, magnesium, and chloride for optimal hydration - 12 tablets per tube - Dissolve in 16oz of water

- Spider removal tool (EV-8550) is compatible with all e*thirteen cranks that have a removable spider. Can also be used as an installation/removal tool for e*thirteen bottom brackets - Crank Arm Extractor tool kit (EV-8555) is compatible with e*thirteen cranks using a 1 degree spindle taper—it is not compatible with 3 degree cranks. 1 degree cranks can be identified by the laser etching on the non-drive side end of the spindle. All 2015+ e*thirteen cranks use 1 degree taper. Includes bolt, washer and extractor tool.

Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.

Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

Zipp's Speed Box 1.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 1.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

Zipp's Speed Box 3.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachment, the Speed Box 3.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams

Zipp's Speed Box 2.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 2.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.

Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

Enjoy your coffee in style with the Zane's Custom Camp Mug. Black Enamel, 13 OZ.

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

XLAB's P-Cage is made of a tough, lightweight nylon/fiberglass composite with a built-in rubber tensioner that secures your bottle. This fine cage also has a slightly flared opening so it's super easy to remove and replace your bottle for effortless drinking. This is the perfect cage for use with XLAB's rear-mount systems (sold separately).

Nylon Replacement Cage With Bottle Cage Bolts for Torpedo System 100 and Torpedo Versa 200 systems.

Contains all of the essential spare parts to freshen your Torpedo. - Includes: 2 Refill Lids, 2 Straw Plugs (Clear Solid and Black Slotted), Straw with Drink Valve and Dolphin Tail Screw.

Keep small items separate for easy access. With a quick twist, the store-all Duo Pod opens up two waterproof compartments, each ideally sized for keeping both large and small items neatly organized. - Fits in cage - Two waterproof compartments to easily sort items by size. No more mixing nutrition with money or jersey pocket baggies. - Large Chamber: 600mL (20.3 fl oz) fit for repair essentials like a tube, two tire levers, XLAB AirStrike CO2 Cartridges, inflator, tool kit and patch kit. - Small Chamber 83mL (2.8 fl oz): Tucks away smaller items like cash, house keys or salt tablets - Includes rattle-proof microfleece bag to block noise - Deep notch keeps pod secure in cage - Capacity: Upper Compartment Capacity 83mL (2.8 fl oz), Large Chamber 600mL (20.3 fl oz) - Ideal Contents: Cash, House Keys, Salt Tablets, Patch Kit, XLAB Inflator - Lower Compartment Capacity: 600mL (20.3 fl oz) - Ideal Contents: Tube, (2) Tire Levers, 2 XLAB AirStrike CO2 , XLAB Inflator, XLAB Tri Tool Kit, Patch Kit - Weight: 106g (including bag) - Height: 197mm tall - Includes: Pod Container and MIcrofleece Bag - Warranty: 2 Year Limited Warranty

High-performance cage at a low price point! Large area bottom hook supports large bottles with Side cutouts to enable fast bottle withdraw and entry. High-performance cage at a low price point! - Large area bottom hook supports large bottles - Extra sturdy high resistance techno polymer design - Made in Italy with the finest Italian quality - Pair with the hyper-reflective Cool Shot insulated bottle (sold separately) Grip Force - Approx 4lbs grip force Ideal Uses - Road - Triathlon (Aerobar and Frame)

Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. Silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars

Xlab's Mezzo Bag is the perfect seat bag for carrying and protecting your spare tubular tire (or 2 tubes), your inflator, and other essential repair items. The bag features a large main compartment and a zip pocket on the outside for easy access. It's made from tough woven nylon. It's easy to install with the hook-and-loop and buckled straps, and it works with both standard and aero seatposts.

Ultra durable outer showcases a ‘carbon-look’, stylish matte finish. Modern material deflects the elements maintaining high resistance to wear, perspiration and electrolyte drinks. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube via stem/top tube straps. - Capacity: 20.4 in3 (334 cm3) - Weight: 2.3 oz (66g)

Airfoil Shape bag large enough to fit phones up to 6.75" (172mm) diagonally. Includes inside pocket for small items. Has extra long front strap, ideal for standard stems. 3.3" high, 46 cu.ins (750cc) capacity. Includes hang tag to promote cell phone usage! Structured, strap mounted bag for standard stems fits cell phones up to 6 3/4" (171.45mm) diagonally and 6-8 gels. - Upgrade to a new, higher capacity top tube bag perfect for handling larger cell phones - Comfortably fits 6-8 gels along with cell phone, or 10 gels without a phone - Keep tablets or used gel wrappers separate in a handy inside pocket - Rubberized bottom keeps the bag in place - Avoid an overheated smartphone on those hot sunny days - bag interior is insulated! - Highly visible, silver colored interior makes it easy to see contents and stay focused on the road Keep Focused on the Road: Smarter Features for Easy-Access Storage - Wide access opening to easily remove and handle cell phone - Inside pocket for tablets, cash or sticky used gel wrappers - Large, easy-pull zipper for ease of access even when race day adrenaline is at its peak - Silver colored interior makes it easy to find contents - One-handed Super-Slide zipper Aerodynamic Design Tucks Right In Behind Stem - Structured shape perfectly optimized to tuck in behind stem and headset spacers without increasing frontal area - Extra long straps ensure security on all styles of bike configurations Contents Stay Cooler - Insulated sides keep your nutrition cooler

Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket XL eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. The silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars.

Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime

Kit-match with a new customizable high-grip carbon cage! Customize Your Cage Colors - Personalize your look with Raptor Talons available in multiple colors - High-grip carbon cage with approx 6lbs grip force - Svelte design for a streamlined look - Weight: 1.0oz (30g) - Pair with the hyper-reflective Cool Shot insulated bottle Grip Force - Approx 6lbs grip force for excellent bottle retention Optimized Carbon - Unidirectional carbon inside and 3K carbon weave outside Ideal Uses - Road - Triathlon (Aerobar and Frame) - Gravel - Mountain - Weight: Approx 30g (1.07oz) - Grip: Approx 6lbs - Construction: Carbon Fiber - Includes: Corrosion resistant Black Zinc screws - Warranty: Limited 3 Year

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

No more fumbling for salt, electrolyte or Ibuprofen tablets. Stealth Pocket XP debuts four outside pockets for easy access to the small vitals that make the big difference. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. - Capacity: 20.4 in3 (334 cm3) - Weight: 2.3 oz (67g)

Torpedo innovation meets vertical bottle design. Brand new 28-ounce (828mL) hydration system with minimal frontal area. Includes composite mount and clamps, splash-proof lid over quick-fill opening, straw with bite valve, and Hydroblade bottle. All-in-one system for one great price! The Hydroblade is for casual mountain biking with front suspension forks. The most convenient, complete vertical hydration system available. - Safer riding - no reaching down for your bottle - Easily refuels. Simply lift lid and fill using wide mouth, quick-fill opening - Bite valve keeps straw full for quick drinking - Comes complete with easy clip-on clamps for triathlon and TT Bars - Mount the Hydroblade on MTB, fitness, drop or flat bars using the Hydroblade Universal Mount, available separately. - Fits widest range of bars – 80-160mm (center-to-center) Easy to Drink and Refill - Hands-free drinking. Simply sip from the straw, keeping your eyes on the road ahead. - NEW ClickCover! ClickCover designed with grippy pull-tab for opening. Simply pop open and refill via Split Cap. Insert bottle nozzle into aperture for fast, quick refill. - Comes with two cap styles! System also includes highly-acclaimed classic Torpedo Clear Cap. Wide mouth, quick-fill opening also makes mid-ride refill of tablets or powder a breeze. - Top-of-the-line bite valve decreases bloating by reducing air intake when sipping - Flat bottom allows bottle to stand upright on counter when filled Clean, Aerodynamic Design - Computational Fluid Dynamics (CFD) optimized aerodynamic shape to minimize system drag - Flow straighteners molded in for added drag reduction Highly-Acclaimed Megadjust Mounting - Securely adjusts to widest range of cockpit configurations 80mm-160mm (center-to-center) - Accommodates up to 20° of aerobar extension rotation SecureClip Brackets - Clips onto aerobar extensions for a clean bike aesthetic. Eliminates need for extra zip-ties, rubber bands or electrical tape to prevent rocking or tilting - Fits 22.2 diameter aerobar extensions

Ultra durable outer showcases a ‘carbon-look’, stylish matte finish. Modern material deflects the elements maintaining high resistance to wear, perspiration and electrolyte drinks. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube bosses. - Capacity: 23.2 in3 (380 cm3) - Weight: 2.7oz (76g)

XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.

XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.

The TURBO WING SYSTEM - XENON is designed to fit the widest assortment of saddles of any of our dual rear-hydration systems, making installation a breeze! Includes 2 Nylon Composite Xenon Cages with 8 lb of grip! The Turbo Wing’s 6061-T6 Aluminum mounting chassis has 3 positions – high, medium and low – to allow you to adjust the system position on to fit the majority of saddles on the market. The TURBO WING is designed to be positioned in the aerodynamic “sweet-spot” directly behind the rider, minimizing drag and maximizing time gains. Depending on rider speed it can save you between 120 and 195 seconds over the course of a full distance triathlon.

Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Low-cost dual carrier with NEW Italian-made cages. Featuring 60% more grip force with an 8lb bottle grip. Includes 2 saddle mounts & 2 Xenon cages. Does not include bag. - Dual bottle system tucks neatly behind your saddle for easy access to hydration - NEW upgraded Italian-made, Xenon cages increase cage grip force by 60% over original model - Mounts low to not hinder your ability to get on and off the bike - First-time rear hydration system buyer? Mounts with a single screw for no-fuss install so you can self-install and quickly get on the road Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping Xenon cages tout an 8lbs grip force (approx) – within the ideal range of rear system grip force for worry-free bottle retention Easy storage upgrades readily available - Add an XLAB Mini Bag – a compact storage bag that sleekly mounts between the cages! - Mini Bag easily fits all the essentials for a clincher repair kit – 1 tube, XLAB Air Strike CO2 cartridges, patch kit, XLAB inflator and tire levers - Includes: 2 Mini Wing Cage mounting brackets and 2 XENON Cages - Color: Silver mounting brackets with black cages - Material: 6061-T6 Aluminum mounting brackets. Nylon composite cages. - Cage Grip Force: 8lbs (3.6 kg) approx - Weight: 186g - Warranty: 3 Year Limited Warranty

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)

Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta 200 mounts on the saddle rails for no measurable drag. Our most popular single rear carrier includes Xlab's Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle. It mounts to most standard metal-rail saddles (for carbon rails, purchase the optional Delta Adapter). For a complete system, purchase the optional X-Strike Inflation Kit and store up to 4 CO2 cartridges.

Highly adjustable stainless-steel carrier with three ways to dial in your fit. Includes our impressive gripping GORILLA cage. Designed to accommodate saddles with transition hooks. The DELTA series of saddle mounted carriers have the largest degree of adjustability of any rear carrier, allowing you to place your bottle in the aerodynamic “sweet-spot” directly behind the rider, minimizing drag and maximizing time gains, typically between 120 and 165 seconds over the course of a full distance triathlon.

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)

Aerodynamic direct-mount front hydration system compatible direct-mount aerobar systems. Includes carbon fiber VERSA aerobar mount, carbon fiber TORPEDO cage, Garmin®? & Wahoo®? compatible telescoping computer mount, and TORPEDO aerodynamic bottle. Directly bolts to compatible aerobar system or integrated BTA mounts. Visit XLAB website for compatibility list. 26oz (768 mL) capacity.

The TURBO WING SYSTEM - GORILLA is designed to fit the widest assortment of saddles of any of our dual rear-hydration systems, making installation a breeze! Includes 2 Carbon Fiber Gorilla Cages with 10 lb of grip! The Turbo Wing’s 6061-T6 Aluminum mounting chassis has 3 positions – high, medium and low – to allow you to adjust the system position on to fit the majority of saddles on the market. The TURBO WING is designed to be positioned in the aerodynamic "sweet-spot" directly behind the rider, minimizing drag and maximizing time gains. Depending on rider speed, it can save you between 120 and 195 seconds over the course of a full distance triathlon.

The Ultimate in Rear Hydration Systems. The next generation of our world championship winning Carbon Wing adds extra user adjustability and saddle compatibility into a faster than ever package. - TWICE AS FAST: Extensive aero research offers nearly twice the time savings over previous generations. - INCREASED ADJUSTABILITY: From the carrier to the cage, all optimizing speed and bottle access. - INCREASED BOTTLE RETENTION: Cages re-positioned for optimum retention and easier access. - CARBON BEAM: Special proprietary layup helps reduce cage vibration. - WIDER COMPATIBILITY: Fits the widest range of saddle rails by mounting on the saddle's horizontal rail.

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

Resolve Dropper Post Rebuild Kit includes refill fluid, graduated cylinder, and 10 travel adjustment spacers.

Wolf Tooth Components, 8-Bit, Multi-Tools, Number of Tools: 3, Tire lever +Disc tool Add-On

8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back in to shape if damaged - Made by hand in Minnesota

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

-Mminimalist, lightweight option to cover essential tool functions. It is stored at the end of an axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes - On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for two double-sided hex bits that nest on the inside of the handle via magnet - Compatible with Wolf Tooth axles that have threaded axle bolt - Includes: Four bits: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible, hex adapter

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads