Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$19.99
Lost or need to replace your wheel block for the Wahoo KICKR SNAP? This accessory is designed to keep your bike stable and level while using the SNAP indoor trainer.
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes
$49.99
Bluetooth and ANT+ Heart Rate Sensor & Calorie Tracker
Connect. Track. Share. The TICKR heart rate monitor accurately tracks your heart rate and calorie burn during any activity or workout. Its new design makes it the lightest and slimmest heart rate monitor on the market! Equipped with Bluetooth and ANT+ technology, TICKR offers an easy and reliable way to connect heart rate to your favorite training apps and fitness devices, and now supports up to three simultaneous Bluetooth connections. The new integrated heart rate sensor and strap design provide a more secure connection and fit, so your training can be optimized, measured, and shared.
NEW! INTEGRATED CHEST STRAP DESIGN
The integrated sensor and strap design of the TICKR provides a more secure connection and a more secure fit to prevent sliding and shifting while working out.
NEW! SLIM, LIGHTWEIGHT HEART RATE SENSOR POD
At 1.7oz (48g) and 12.01mm thick, the TICKR is the lightest and slimmest heart rate monitor and strap combination on the market, not to mention the most comfortable!
NEW! MULTIPLE SIMULTANEOUS BLUETOOTH CONNECTIONS
TICKR supports up to three simultaneous Bluetooth connections for a trouble-free start to your workout.
NEW! TOP DISPLAY LED INDICATOR LIGHTS
Two LED lights show visual confirmation of the TICKR connection status via Bluetooth and / or ANT+: searching for a connections (blue slow blinking light), connecting (blue fast blinking light), and reading heart rate (red blinking at current beats per minute).
DUAL-BAND ANT+ AND BLUETOOTH TECHNOLOGY
Both ANT+ and Bluetooth capabilities allow for a wireless connection to both smartphones and GPS devices at the same time or separately.
REAL-TIME HEART RATE, CALORIE, AND WORKOUT DURATION TRACKING
TICKR measures vital workout metrics, including heart rate, calorie burn, and workout duration in real-time with the Wahoo Fitness app. These metrics can also be sent to compatible third-party apps that track these metrics.
FRONT SENSOR & STRAP CONNECTION
The front connection on the TICKR sensor and strap allows you to gear up and go quickly. You don’t have to fumble through side placements of snaps and hooks.
COIN CELL BATTERY
Includes a coin cell battery that can last for over 500 hours of workouts.
ADVANCED PERFORMANCE MATERIAL STRAP
Made from advanced performance materials, the TICKR strap is designed to fit comfortably chest, yet stay securely in place during intense activity.
APPLE WATCH AND APPLE TV INTEGRATION
Connect directly via Bluetooth to your Apple Watch or Apple TV as another option for gathering heart rate data while you workout.
THIRD PARTY APP COMPATIBILITY
Works seamlessly with over 50 apps - including Zwift, The Sufferfest, Peloton for cycling and Runkeeper and MapMyRun for running.
TECH SPECS
- Dimensions (LxWxH): 2.5" L x 0.2" W x 1.5" H (6.3cm L x 1cm W X 3cm H)
- Weight: 1.7 oz (48 g) with strap
- Battery: Coin Cell (CR2032)
- Battery Life: Over 500 active hours
- Sweatproof: Yes (Handwashable Strap)
- Water Rating: IPX7 (Waterproof up to 5 ft.)
- Strap Length: Adjustable from 23" to 48"
IN THE BOX
- TICKR heart rate pod
- Adjustable soft strap
- CR 2032 Battery (installed)
- Quick Start Guide
- Important Product Info Guide
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes
$79.99
TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours.
- Dual band technology
- Real time heart rate and calorie tracking
- Advanced performance material
- USB rechargeable battery
- LED indicator lights
- Two adjustable bands included
- Third party app compatibility
- Apple watch and apple TV integration
$99.99
Wahoo's latest accessory for the KICKR Smart Trainer lets you worry less about your connection and focus on your virtual ride at hand. No more wireless drop outs or signal interference—KICKR Direct Connect attaches your KICKR to your router for a constant streaming virtual ride or race. Compatible with many 3rd party apps including The Wahoo SUF Training App, TrainerRoad, Fulgaz, and many more.
Note: KICKR Direct Connect is not compatible with previous KICKR editions, KICKR CORE, and KICK SNAP.
Don't Get Dropped
No more worrying about your wireless connection dropping during your virtual races and online group rides. KICKR Direct Connect provides a hard-wired solution from your KICKR Smart Trainer to your internet router.
Safe and Secure
To prevent damage to the Direct Connect Pod or your KICKR, Direct Connect has a Quick disconnect cable that is robust enough to stay attached during normal use but will easily break the connection if enough pressure is applied.
Zero Configuration
Direct Connect is built on Multicast DNS to provide a simple, plug-and-play solution to stay connected.
App Compatibility
KICKR Direct Connect is compatible with The Wahoo SUF Training App, Trainer Road, Rouvy, Fulgaz, bKool, RGT Cycling, and Veloreality, with more 3rd party partners coming in the future.
$11.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
$13.99
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions.
- Highly absorbent
- Measures 30cm x 115cm
$29.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
$29.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.
$39.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
$59.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
$69.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
$69.99
- Adapter for Tacx Direct Drive trainer
- 01 is compatible with 142 x 12mm and 148 x 12mm
- 02 is compatible with 135 x 10mm
- 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive
trainer), 142 x 12mm and 148 x 12mm
- 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the
thru axle mount on a Tacx NEO or FLUX Smart trainer.
$69.99
- Large and rollable trainer mat
- Made from high quality, water-repellent 6mm thick foam
- Protects your floor against scratches and sweat
- Muffles noise and vibrations
- 180 x 85 cm
$99.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
$109.99
Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.
$109.99
With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.
$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$249.99
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds.
The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store.
The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers:
- T1980 Bushido (ANT+)
- T2020 i-Genius
- T2050 Tacx IRONMAN trainer
- T2060 Tacx IRONMAN Smart
- T2080 Genius Smart with Upgrade Smart
- T2170 i-Vortex
- T2180 Vortex Smart with Upgrade Smart
- T2240 Flow Smart with Upgrade Smart
- T2780 Bushido Smart with Upgrade Smart
$8.99
Replacement straps for Sunlite FlatForm II pedals
- Strap size: 340 x 55mm
$9.99
- Heavy-duty nylon toe straps with classic style steel buckles
- Narrow design fits most cage style pedals
- 460mm length
$29.99
• Plastic riser block allows the position of front wheel at one of two heights
$26.24
$34.99
25% Off
Adjust resistance on Mag trainer without leaving the saddle.
- Quick Release mounting system fits most stems.
- For use with the Mag bike trainer only
Page 1 of 2
Next page