Racks

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

Original replacement rack for Trek 920. Product details - Designed to fit forks with forward-facing eyelets at the dropout - Designed specifically for use with Trek 920 bikes Specifications - Size: One size - Rack type: Front racks - Adjustable feet: No - Disc compatible: Yes - Includes light mount: No - Weight capacity: 50 lbs (22 kg) - Material: Aluminum

Need to haul a little more? These durable, weather-proof panniers are the answer. - 4.5 kg / 10 lbs. carrying capacity per side - 11.2L volume per side - Drain holes stop water from pooling - Includes all installation hardware - Do not exceed a gross vehicle weight (bike, riders, cargo) of 200kg (440 lbs.)

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material

If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm

The magic is in the mounting MIK stands for Mounting is Key, and this rad rear rack comes equipped with this functionality. Because easy is the name of the game. Easy on. Easy off. Carry your cargo in style. - MIK compatible - Carrying capacity up to 25kg or 55lbs - Stainless steel hardware included - Rear rack designed to be compatible with most Electra 24" wheel models

This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.

Genuine replacement parts A MIK compatible rack that is easy to mount. MIK: Mounting Is Key - Quick-and-easy installation adds storage and utility to compatible bikes - MIK mounting system provides secure, integrated mounting with compatible bags - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard boot bags or panniers - MIK accessories require brackets on underside of bag or pannier to be moved to narrow mounting holes - Single-bolt strut mounts allow maximum adjustment and easy installation - Hardware not included - For use on e-bikes with RIB system

The Morse Cargo Cage is designed to increase a bike's carrying capacity. This was created for bikepacking, self-supported races, and rides that just require more gear. The Morse name extends the popular dot-dash mounting pattern that allows for 35mm of vertical adjustment, which is also featured on Wolf Tooth Morse Bottle Cages. It will fit on a fork three-pack mount or anywhere on the frame that has bottle bosses. The Morse Cargo Cage also has bolt mounting points on the angled sides for additional versatility. It is made here in Minnesota, USA from durable, corrosion-resistant 5052 aluminum. - Cage can be purchased with two 20" Wolf Tooth Cargo Straps; straps can also be purchased individually - Designed to fit standard 64mm bolt-spaced 3-pack mounts - Vertical positioning adjustment up to 35mm with Morse dot-dash mount pattern - Mount options in center of cage, as well as on right and left sides; use included spacers when mounting the cage by its side - Designed to fit fork bags, 32 oz. Nalgene bottles, large burritos, and more - Three stainless steel bolts and plastic spacers included - Replacement parts available

The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

The COSMO is the flagship model for stainless steel Tubus carriers. It has a wider cargo area, extreme carrying capacity, and a longer back for better tail light protection. - Weight: 680g or 24 oz. - Load Capacity is 40kg or 88 lbs. - Wheel size 26? or 700c

If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in

The Tubus Fly is made of two stainless-steel tubes, making it the purist in the lightweight class. This 369-gram masterpiece carries 18 kilograms of luggage, making this model one of the most efficient racks available. With the Fly, optical pleasure and high function work in perfect harmony.

Low or high rider? Just take both! tubus presents the first combi-carrier that combines the properties of both systems: Lateral driving stability thanks to the low center of gravity, with space on top for bulky items such as a sleeping pad and sleeping bag. With the GRAND EXPEDITION FRONT for the front, you don't have to make any compromises when transporting luggage. This is tube. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer or the bicycle manufacturer for mounting a luggage rack. There must be no squeeze connections.

Genuine replacement parts
Adds utility while still looking great.

Adds functionality. Adds style.

- Compatible with pannier bags
- Max weight capacity 14kg (30 lbs.)
- Includes hardware to connect the rack to the frame
- Includes hardware to connect the rack to the fender
- Not intended for use with child carriers

Increase hauling capacity and add versatility to your bike with the Check-OUT SL Rear Cargo Rack.
The rack includes 3-pack threaded bosses to fasten additional gear to the side of the rack. Use the hook and loop attachments to secure a dry bag or bag of your choosing to the top of the rack.

Features
- Includes frame mounting hardware and linkage
- Threaded 3- Pack bosses for mounting gear to the side of the rack
- Hook and loop bag attachments to secure your load
- Not intended for use with child carriers
- Max weight capacity 10 kg (22 lbs)
- Refer to the Service Manual for assembly & service instructions

Front cargo rack designed for the crown mount-equipped Farley fork. STRAP IN Bolt this custom rack onto your crown mount-equipped Farley fork and carry all your gear. PRODUCT DETAILS - Made of lightweight, durable aluminum - Mounting hardware included - Max weight capacity 7 kg (15 lbs.) - Not intended for use with child carriers

Rear cargo rack designed for the new Farley. BE PREPARED Gear up and go farther with this versatile rear rack. Includes options for mounting panniers on the sides and a bag on top. Custom made for the new Farley, this rack was designed with a dropper seatpost in mind, allowing you to get low on rough terrain and make loaded-down remounts easier. PRODUCT DETAILS - Made of lightweight, durable aluminum - Mounting hardware included - Max weight capacity 25 kg (55 lbs.) - Not intended for use with child carriers

Original equipment replacement parts for your ride. Replacement rack for the aftermarket Fetch+ 2 Front Pannier Kit. PRODUCT DETAILS - Made of lightweight, durable aluminum - Mounting hardware sold separately

Adds functionality. Adds style. - Designed specifically for the 2021-2023 Powerfly FS - Requires specific 2021 Trek Powerfly FS rear full fender to mount - Compatible with MIK, standard trunk bags, and panniers - Does not include mounting hardware - Compatible with 27.5" and 29" wheel Powerfly

Adds functionality. Adds style. - Compatible with 27.5" and 29" wheel Powerfly - Does not include mounting hardware - Confirm compatibility before use

Original replacement accessories for your ride. Genuine replacement parts For OE replacement only. PRODUCT DETAILS - Durable and lightweight aluminum construction - See original bike product page for service manual and install instructions

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - Designed for compatibility with disc brakes - 800g - 55lb weight capacity

- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams