Your Search: "valve adapter"

Rear Shock Air Valve Adapter (for charging IFP) - SIDLuxe A1+ (2020+)

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials • Two stage seal design, improves sealing and stability on all presta valve stems • Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear •15 degree stem angle reduces stress on the valve stem from pump hose • 12.0g

• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch

Adapts Presta valve stems for use with standard Schrader pumps.

Have an old pump lying around that doesn't work with the standard Presta valves? This is your solution! Built to convert your old schrader pump into a Presta pump!

Converts Presta valves for use with Schrader-compatible inflation devices. - Machined aluminum is lighter than brass alternatives - Rubber O-ring provides a secure seal to prevent air leakage - Sold as a card of 12

Prestadapter is a lightweight Presta-to-Schrader adapter with one more great feature. The hole on the opposite side is a Presta valve core remover! Super-light Anodized Aluminum. - Schrader to Presta valve adapter - Presta valve core tool - Forged alloy single piece precision machined body - Only 1.3 grams actual weight each - Two (2) adapters included

Replacement adapters for Jagwire Elite Bleed Kits - Features quarter-turn valves that make it easy to quickly open and close the bleed system - Red seals provide easy identification for use with mineral oil systems only

Angled Presta valve adapter - Designed for disc wheel use

• High-flow steel barrel • 160 PSI high pressure pump • Sturdy base and Ergonomic T- handle • Schrader valve w/ thumblock & presta adapter • EZ Read gauge

- 22" high flow steel barreled floor pump - 2.5" EZ Read gauge - Schrader valve head with included Presta adapter - 160psi maximum - Type: Floor - Length: 22" - Barrel Material: Steel

- 21" high flow composite barrel floor pump - Schrader valve head with included Presta adapter - Type: Floor - Head Type: PV/SV - Max PSI: 120psi - Length: 21" - Barrel Material: Composite

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

Rims: WTB CZR i30 Carbon 29" - ETRTO 622-30 - Inner width: 30mm - Torayca T700 UD carbon fiber for stiffness and compliance - Asymetric and angled spoke hole drilling - Externally reinforced spoke bed - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano XT HB-M8110-B Boost - 15x110mm (Axle not incl.) - Center Lock (6-Bolt adapter incl.) - Polished angular contact bearings - Contact sealed hub Rear hubs options: Shimano XT FH-M8010-B (Boost, HG) / FH-M8110-B (Boost, MS) / FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter incl.) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible 10/11 speed MTB (12 speed HG with 1.85mm spacer, not included) - MS compatible 12 Spd Micro Spline Sold in Pair, including: - Tubeless Valve (x2) Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

Rims: WTB CZR i23 Carbon 700C - ETRTO 622-23 - Inner width: 23mm - Torayca T700 UD carbon fiber for stiffness and compliance - Asymetric and angled spoke hole drilling - Externally reinforced spoke bed - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - 28 holes Front hub: Shimano HB-RS770 Ultegra series - 12x100mm E-THRU (Axle not included) - Center Lock (6-Bolt adapter included) - Polished angular contact bearings - Contact sealed hub Rear hub: Shimano FH-RS770 Ultegra series - 12x142mm E-THRU (Axle not included) - Center Lock (6-Bolt adapter included) - Polished angular contact bearings - Contact sealed hub and freehub body - Compatible with 11 speed Road (10 speed compatibility requires 1.85mm spacer, not included) Sold in Pair, including: - Tubeless Valve (x2) Assembled in North America by experienced wheelbuilders with Sapim Race Butted Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples

Planet Bike's Red Zeppelin CO2 bike tire inflator features rugged metal construction and the Airflation control knob for reliable and accurate inflation. It accepts all sizes of threaded cartridges and the inflator head threads directly onto either Presta or Schrader valves without an adapter. It'll make quick work of roadside repairs. - Precision-machined body and head with Airflation Control 2.0TM knob for improved reliability and ease-of-use - Threads directly onto Presta or Schrader valve without adapter - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 48 x 40 x 25 mm - Weight: 56 grams

Rims: Mavic XM119 Disc 26" (Black) - ETRTO 559-19 - External width: 24mm - Inner width: 19mm - Profile height: 20.5mm - Disc Brake Only - For Schrader or Presta valve (Adapter included) - 32 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included

The high-pressure portable hand pump with hidden hose, pressure gauge, and co2 inflator. Details - Premium pump with flexible rubber hose that hides inside the body of the pump when not in use—perfect for those stealth air-strikes! - Features also include a concealed co2 inflator (Presta only), air pressure gauge, magnetic head with twisting collar, a folding and locking handle, and a Presta/Schrader valve adapter (fully threaded Presta valve bodies only) - Hp (high pressure) version recommended for tires 45c and narrower - All klic pumps come with a bottle cage bracket mount Specs - Length: 260mm - Pressure: 120psi/8.3bar - Warranty: 5 years - Weight: 170g

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Front hub: Shimano HB-MT400-B Boost - 15x110mm (Axle not included) - Center Lock (6-Bolt adapter included) - Angular contact bearings - Contact sealed hub Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower-profile air-release button allows fine tuning of tire pressure while preventing unintended pressure release. - Head: SmartHead DX3 w/ air release button & extra-long hose - Barrel: Painted steel - Gauge: 200 psi / 14 bar, Top mounted digital (Tolerance : < 100 psi ± 1 psi / > 100 psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 337cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushioned rubber for digital gauge protection, auto off, Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 73.5 x 25.5 x 16.4cm / 28.9" x 10" x 6.5" - Weight: 1.97kg / 4.34lb

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Front hub: Shimano HB-MT400-B Boost - 15x110mm (Axle not included) - Center Lock (6-Bolt adapter included) - Angular contact bearings - Contact sealed hub Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

Keeping your bike's tires properly inflated is the best way to ensure a happy ride. Maintain pressure and avoid pinch flats with MSW AirLift Floor Pumps. - Smart head fits on both Presta and Schrader valves - Steel barrel and steel base - Bleed valve for fine-tuning pressure - Max pressure: 150 psi - Extra-long 48-inch hose - 2.5-inch diameter gauge - Hidden inflation adapter kit for toys, balls & rafts - Overall height: 25-inches

- Latex-based formula which can simultaneously inflate and seal most common punctures quickly - Works with tubes, tubeless, and tubular tires - Proven to seal up to a 6mm puncture on tubeless tires, getting you back in the saddle faster - Enough pressure to seat a tubeless tire onto a rim - Comes with an easy-to-use hose adapter and both Schrader and Presta valve compatible threaded nozzles - Fills a 29 x 2.4 MTB tire up to about 29psi

Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

Rims: WTB ST i23 24" - ETRTO 507-23 - Inner width: 23mm - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano HB-MT400-B Boost - 15x110mm (Axle not included) - Center Lock (6-Bolt adapter included) - Angular contact bearings - Contact sealed hub Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: Mavic XM119 Disc (Black) - ETRTO 559-19 - External width: 24mm - Inner width: 19mm - Profile height: 20.5mm - Disc Brake Only - For Schrader or Presta valve (Adapter included) - 32 holes Front hub: Shimano Deore HB-M525 (Black) - 9x100mm - 6-Bolt Disc Mount - Super Polished Bearing Races - Contact sealed hub - Quick Release Binder included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano XT FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 29" - ETRTO 622-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hub: Shimano FH-MT400-B (Boost, HG) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano XT FH-M8010-B (Boost, HG) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)