Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals
$99.00
- Weight: 220g
- Body: NEP Injection-Molded
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Q-Factor: ±53 (mm)
- Cleat: XPEDO THRUST 7 (6º Float or Fixed)
$99.99
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency.
- Weight: 260g
- Body: Magnesium
- Spindle: CroMo
- Bearings: 2 Cartridge
- Bushings: 1 DU
- Pins: 28 Straight Pins per pair
- Size: 106x100x11 (mm)
$119.00
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support.
- Weight: 332g CrMo
- Body: 60661 CNC AL
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)
$129.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm.
- Weight: 468g CrMo
- Body: 60661 CNC AL
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Pins: 16 adjustable height grub pins per pair
- Cleat: XPEDO XPT (6° Float)
$189.00
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support.
- Weight: 292g Ti
- Body: 60661 CNC AL
- Spindle: Titanium
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)
*Titanium spindles have 180lbs weight limit.
$199.95
Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris.
Slim Convex Profile
Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support.
Extra Grip
Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized.
Formed with Purpose
The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer.
Reliable Performance
Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Precision Machining
Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm.
Dual-Concave Profile:
- Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side.
Extra Grip:
- Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts.
Shaped with Purpose:
- The shape of Waveform Aluminum Pedals matches the footprint of your shoe
Reliable Performance:
- Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Tapered Edges:
- Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain
Two sizes:
- Large: 112mm x 106mm - 384g
- Small: 105mm x 99mm - 373g
Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$39.95
Wellgo WPD-823 Clipless Mountain Pedals.
- Includes 98A cleats, Shimano SM-51 compatible
- Dual-spring release/entry tension adjustment
- Four degrees of Rotation
- 9/16"
$19.99
WTP's large platform design team series pedals.
- 9/16"
- Spindle Material: Chromoly
- Pedal Body Material: Composite/Plastic
$159.99
The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level.
- Weight: 224g (per pedal pair)
- Spindle Material: Chromoly
- Spindle Length: 53mm
- Float: 5 to 15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$229.99
Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride.
- Weight: 220g (per pedal pair)
- Spindle Material: Stainless Steel
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$279.99
Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs.
- Weight: 224g (per pedal pair)
- Spindle Material: Stainless Steel
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 39º
- Bearing: Sealed
$449.99
The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics.
Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day.
- Weight: 168g (per pedal pair)
- Spindle Material: Titanium
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$64.00
Velo Orange Pedals
- Extruded and CNC-machined aluminum, sandblasted silver finish
- 90 x 60mm platform with two replaceable pins on each side
- Toe-clip compatible
- 9/16"
$50.00
VP's Vex Pedals are incredible workhorses with sturdy, large platforms and a dual-concave design with pins for an awesome grip. They're also light making them ideal for mountain biking, freeriding, BMX and even city riding. They're built to last, too, with cast-aluminum bodies, tough forged, heat-treated and CNC-machined chromoly axles and quality sealed bearings.
- 385 grams
- 9/16 axle
$60.00
Lots of foot-huggin' lovin and a natural connection to your bike...that's what you get from VP’s all new, dual-concave platform design. VP-Aim was developed with input from both top free riders and local soul riders to deliver the right feeling of control and security at the right price. It’s still thin, it’s still stylish, and it can take all the beating that you can give it and keep rolling on.
- 105 x105 x18mm platform
- 9/16"
$80.00
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability.
- 345 grams
- 9/16" axles
$103.99
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability.
- 406 grams
- 9/16" axles
$59.99
Platform pedals with a durable nylon design and replaceable pins for consistent grip.
- Durable nylon body with a proven shape for comfort and confidence
- Virtual concave design with pin placement secures your shoe for pedaling and descending
- Durable axle spins on sealed cartridge bearings
- Replaceable steel traction pins
- Install with 8mm hex wrench
$25.00
An extremely low-profile composite pedal that can handle just about any type of riding.
- Ultra-durable composite body
- Low-profile body in a slim-lined platform dimension
- 2DU Bushing System with low-friction coating
- Boron axles
- 12 molded traction pins
- Pedal body dimensions: 95 x 72 x 25mm (LxWxH)
- 9/16"
$30.00
Alloy pedals with a smaller platform that is ideal for smaller sized shoes and offers ample ground and cornering clearance.
- 6061-T6 die-cast alloy body construction
- 2DU Bushing System with low-friction coating
- Boron axles
- 14 removable traction pins per pedal
- Pedal body dimensions: 105 x 93 x 25mm (LxWxH)
- 9/16"
$69.00
- All of the technologies from the rest of XPRESSO line at an affordable price.
- The large platform, low stack height, and adjustable carbon blade tension make this a great pedal for all cyclists looking for pedaling comfort and efficiency without a high cost.
- If you're new to clipless pedals or have ever struggled to clip into your pedals, you'll love the ICLIC system, which features a pre-opened design that makes clipping in extremely easy.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$74.00
- Versatile and incredibly affordable.
- The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time.
- The ATAC EASY cleat makes for simple setup and clipping in and out even easier.
- Pedal Material: Composite
- Pedal Weight: 197g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$84.00
- Large platform and an easy-entry system, make it perfect for everyday use.
- Cleat engagement is easy and positive in every condition and for every skill level.
- Hollow steel axle makes the pedal lightweight yet durable, while the open design keeps you riding with ease, clearing mud and debris every time you clip in.
- Pedal Material: Composite
- Pedal Weight: 192g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$90.00
- Built for everyday use and features a stainless steel top plate and a hollow, steel axle.
- A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal.
- The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$95.00
- Oversized, hollow, steel axle, is lightweight yet rugged enough for any trail condition.
- TIME's clamping system makes clipping in super easy.
- Two release angle options (13° or 17°) along with a self-cleaning design that means you'll always be able to clip in – even in the muddiest of conditions.
- Pedal Material: Composite
- Pedal Weight: 190g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''
$106.00
- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents.
- TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast.
- The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 238g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$132.00
- The only pedal in the XPRESSO line to use a carbon body.
- Hollow steel axle is light and durable at the same time.
- ICLIC system is a pre-opened design, making clipping in super easy.
- Carbon blade tension adjustment, a low stack height, and an oversized platform for pedaling efficiency and comfort.
Specs:
- Pedal Material: Carbon
- Pedal Weight: 99g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$175.00
- Power transfer and stability are maximized with a large, 725mm2 surface area.
- Bottom fairing to improve aerodynamics and protect the carbon blade.
- TIME's patented preopened ICLIC system allows for fast and easy cleat engagement.
- Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism.
- Hollow, stainless steel axle.
Specs:
- Pedal Material: Carbon
- Pedal Weight: 113g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$56.00
Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design.
- Body: Reinforced Premium Thermopoly
- Axle: CNC-machined Cro-Mo
- Bearings: Ultralight, self-lubricating sealed bushings
- Replaceable pins
- Size: 113mm x 114mm
- Weight: 180g (each)
Page 1 of 9
Next page