Your Search: "valve adapter"

Inserts and removes Presta valve cores

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

- Quality alloy construction makes valve core removal and installation a breeze. - Designed for a lifetime of use to keep you rolling for years to come.

Have an old pump lying around that doesn't work with the standard Presta valves? This is your solution! Built to convert your old schrader pump into a Presta pump!

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Wall thickness: 0.9mm

The Problem Solvers Suspension Pump Adapter is for use with model-year 1999 to 2000 RockShox SID suspension forks. This aluminum adapter threads into the fork to add air and fine-tune the pressure.

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Length: 32mm - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Presta - Valve Stem: Smooth - Valve Core: Non-Removable - Wall thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Wall thickness: 0.9mm - Removable valve core

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Removable valve core - Wall thickness: 0.9mm

- The Pressure Relief Valve Stem Nut has been designed to ensure that an improper tubeless tape job doesn’t result in a damaged rim. - If the tubeless seal between tire’s air chamber and the rim’s cavity is breached, the rim’s cavity can become pressurized resulting in a pressurized rim and potential delamination of the rim’s sidewall. The Pressure Relief Valve Stem Nut prevents this from happening by creating an escape for the air via fluted reliefs on the inner diameter of the nut. - Air escaping from these ports, indicates a compromised tubeless seal. - Recommended for all tubeless SES wheelsets as well as other brand road tubeless wheelsets. - Each order includes two nuts, enough for one wheelset.

Prestadapter is a lightweight Presta-to-Schrader adapter with one more great feature. The hole on the opposite side is a Presta valve core remover! Super-light Anodized Aluminum. - Schrader to Presta valve adapter - Presta valve core tool - Forged alloy single piece precision machined body - Only 1.3 grams actual weight each - Two (2) adapters included

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm - Flat Fold Width: 44mm (1.75-2.10), 65mm (2.50-3.0), 78mm (3.0-3.50)

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Removable valve core - Wall thickness: 0.9mm

The Bite Valve Cover keeps your reservoir bite valve free from dirt and dust on the trail.