Stems

- 3D forged alloy construction - Fits 1-1/8-inch (28.6mm) steerer forks - Fits 31.8mm handlebar clamp - Heat treated hardware - Weight: 152g (100mm)

Zipp's Service Course SL OS Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Wide range of sizes and angles. - Service Course SL OS stem made for 1-1/4" steerer tube bikes. Ships with shims for 1-1/8" steerer tubes - Zipp Quickview integrated computer mount available separately - Lifetime warranty

Zipp's Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Zipp Quickview integrated computer mount available separately - Lifetime warranty

- 3D forged and CNC machined AL2014 - 4 bolt sculpted faceplate with titanium hardware - 40mm stack height - 113g (100mm)

- 3D forged, 6061 aluminum alloy body with oversize box cross-section - Oversized 52mm wide 6061 alloy faceplate - 35mm handlebar clamp diameter - Not OD2, regular 1-1/8"

Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g

ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°). FEATURES - Compatible with all Giant OD1 and OD2 head tubes sizes - Available in ±10° and ±20° angles - Available in eight lengths from 70 to 140mm - Purpose-engineered shaping achieves maximum stiffness and lowest weight - Integrated aero silhouette from stem cap to spacers

Features a wide range of adjustment to dial in your fit. Ensure a proper fit for the best ride experience. Product details - High-quality alloy adjustable stem is quill-style, for use with threaded forks - Seamless integration with Bontrager's Elite Blendr mount kit, sold separately - Features 64 degrees of angular adjustment - 50mm stack height adjustment allows for a wide-range of fit options - Quill stem length is 180mm

Genuine replacement parts Get back on the road with a genuine replacement stem For optimal adjustability. - Bontrager adjustable stems - Available in several lengths - Includes M6 x 40mm bolt

- 3D Forged and CNC machined from AL7050/T73 - 3D Forged AL6061/T6 faceplate - 4-bolt cold-forged alloy faceplate - Cr-Mo hardware - 40mm fork clamp stack height - 162g (80mm)

Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.

Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation

The Odyssey Broc v2 stem is a refined update to Broc Raiford's popular signature Raft stem. The Broc stem utilizes a classic top-load and 6-bolt design, but it now comes with a slightly taller 33mm rise and sleeker lines below the clamp. The bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip. - Special surface contouring and a larger bolt head spec for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)

An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish

The Hope AM/Freeride Stem is light, stiff, and provides pin-point steering. It's proudly CNC'd in the UK from solid billet 2014-T6 and features opposing steerer and moto-style handlebar clamp for exceptionally rigid steering characteristics. - 10.9 DIN chromoly bolts - Weight: 135g

Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you. - Matching top cap included - 6° of positive or negative rise - 1-1/8" steerer diameter - Stem body wraps 220° around bar clamping area, holding it in place for easy installation - Material: 2014 alloy - Bolts: stainless steel black - Matching top cap included - Angle: 84°/6° - Bar clamp diameter: 31.8mm - Bar clamp width: 44mm - Steerer diameter: 1-1/8" (28.6mm) - Steerer height: 42mm - Weight: 140g (100mm)

You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)

The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness

- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)

You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)

You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)

The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes

An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm

Get back on the road with a genuine replacement stem. Original equipment replacement stem for your Madone SLR. PRODUCT DETAILS - High fit stem is 7-degrees of drop - Not compatible with other bikes - For installation instructions, please see your Madone Assembly Manual

FSA ACR (Aerodynamic Cable Routing) Stems have a low-profile frontal area that is suitable for road and gravel riding. - Aerodynamic Cable Routing (ACR) - Low-profile frontal area - No rotation limit - Body and faceplate - 6061 T6 - Chromoly hardware - Specific frame and headset required - 31.8mm handlebar clamp diameter - 30mm fork clamp stack height - Compatible with: K-Force Light ACR Compact, SL-K ACR Compact, Energy ACR Compact, K-Wing AGX and K-Wing AGX handlebars

Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents

At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D-forged from 2014 aluminum for great strength, with the final refinements carried out by CNC machining. Titanium bolts complete the package. - Semi Integrated Cable routing (SCR) - 3D-Forged and CNC-machined from AL2014 - 4-bolt sculpted SL faceplate

- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included

- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm

Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars. - Finish: Black Ano - Weight: 130g (100mm) - Rise: Varies - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm - Materials: EA90 alloy

You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 25D Stem offers 25-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged and internally machined 2014 alloy body - CrMo faceplate bolts and patented 220 degree bar clamp design reduces weight, increases stiffness and distributes stress more evenly - Stainless steel steer tube bolts and curved clamp slot reduces weight and steer tube stress - 5Nm torque max on all hardware - Fits most road and mountain bars - Installs without the removal of levers - Angle: 25-degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 40mm - Blatte finish - 120g (90mm)

Some might call it magic—PRO likes to refer to it as co-creation: aligning all forces to work in favor of you. The PRO Vibe Stem is designed to align your cockpit perfectly with your bike for an optimal riding position. Supreme stiffness offers you more control during those high-speed descents or maneuvers. It's also developed for ultimate integration with Di2 to give you maximum aerodynamic performance and ultra-clean styling. With the specially positioned cable ports, you can internally route Shimano Di2 cables. All of the advantages of Di2, with none of the cables showing. Align yourself with performance—use the PRO Vibe Stem. - Anodized AL-7075 - Shimano DI2 integration - Lightweight titanium bolts - Integrated topcap

- Lightweight forged aluminum construction - Hidden 2-bolt face clamp - EN Road safety certified - Compatible with 1-inch steerer (22.2mm internal diameter) - Length: 90mm, 110mm, and 120mm lengths - Bar clamp diameter: 26mm - Stem angle: -17 degrees - Steerer length: 140mm

Aaron Ross' signature Boss v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Special surface contouring and a larger bolt head spec for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)

- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized

Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation

The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)

the Pro LT stem is constructed of strong and lightweight anodized 6061 alloy, and features a headlock system for a secure front clamp fixation.

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

Replacement stem for the 2018+ Giant Propel - -8 Degree rise - Alloy stem - Composite cover Includes: - Stem - Cover - Top Cap - Hardware - Di2 plugs

3D-forged and CNC-machined AL6061/T6 mountain bike stem. - 4-bolt cold-forged alloy faceplate - Chromoly hardware - 40mm fork clamp stack height

• Steel • Polished-chrome finish • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • 10-inches tall (extra tall)

- Steerer Diameter: 1" or 1-1/8" (includes shim) - Length: 70, 90, 110mm - Bar Clamp: 25.4 or 31.8 (includes shim) - Angle: +/- 35 degrees - Material: 6061 Aluminum - Shot-peen finish

Full CNC machined AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design - EN-Mountain safety certification

- 3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design

The BrickTop alloy stem is a classic style, top-mount BMX stem with a 4-bolt handlebar clamp.

Origin-8's Classic Pro Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. This sweet stem has a polished anodized finish for durability and style. Different lengths are available for customizing the reach to your handlebars.

A no-muss, no-fuss, four-bolt stem perfect for any threadless 1-1/8" steerer. Available with 25.4mm clamps, so whatever your dream bars, you can make 'em fit. - Choose between 80mm or 90mm reach (90mm is standard on our Original Series) - +-7 degrees - Threadless 1-18"

- Available in a variety of lengths, angles, and bar bores for the perfect fit - Road or Mountain compatible - 3D forged AL6061-T6 alloy construction - 40mm stack height - 4-bolt front loading one-piece faceplate design - ISO-Mountain safety certified

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: In this particular model stem we’ve tailored the Oversized strategy to favor utility and access. The geometry has been altered to allow for easy handlebar removal while at the same time scavenging material from low stress zones. Ideal for those who don’t want to compromise on user experience to gain performance. These stems are engineered for the larger-sized racers.

3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design

- High angle stems designed specifically for use with Monstercross or Gravel bikes equipped with off-road drop bars - Available in +25° and +40° versions and lengths from 60 to 130mm - 3D forged 6061 aluminum construction - Fork Dia: 1-1/8" - Bar Clamp: 31.8 - Color: Blk - Material: AL6061

The Afterburner MTB Stem is 3-D forged and CNC machined from AL6061/T6. You have the option to run this stem at a + or – 6-degrees to suit your racing style. - 3D forged and CNC machined from AL6061/T9 - 4-bolt cold forged front clamp - 40mm clamp stack height - Weight: 149g

- Adjustable top mounted threadless stream - Adjustable from 0 to 60 degrees - Available in two lengths - Material: Alloy