Your Search: "claris "

Frame clamps can be used to attach fender stays to suspension forks and other frame points of the bicycle as needed. - Includes 2 clamps and screws

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip

Claris R2000 series 8-speed chainrings are a reliable option for long touring, town cruising, and daily commuting. - Direct replacement for R2000/R2030 cranks - Hyperglide technology ensures smooth and reliable shifting - Compatible with 4-arm crank design

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Chris King Blue Grease is a resilient lubricant optimized for headsets and as a general assembly compound. Viscous and tacky, Blue Grease is an ideal headset bearing lubricant and assembly compound, engineered to withstand extreme riding conditions. Compatible with steel and ceramic bearings.

- Aluminum clamps secure the grip on both ends with a hex-broach pinch bolts - For 22.2mm (7/8") bars - Packaged for 1 pair/set of grips and includes Snap Cap end plugs

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

- High performance compounds recommended for all conditions - Steel backing

Replacement parts for Zipp aerobars. Compatible With: - HB-VKAL-BS1-A1, HB-VKAL-BS1-A2, HB-VKAL-CLIP-A1, HB-VKAL-CLIP-B1, HB-VKAL-EXT-A1, HB-VKAL-EXT-A2

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

Shimano's Claris cassette is an incredible value for your 8-speed drivetrain. This cassette comes in a range of sizes to suit your riding style and terrain.

• Replacement locking handlebar grip sets for XX1 Grip Shift • includes one 100mm right and one 122mm left grip • Available in black or silver.

Park Tool's Repair Kit features the most common replacement parts for the 100-3C and 100-5C clamps. Includes: • 118s adjusting barrel • 117s eyebolt • 121s adjusting barrel pivot • 136 nut • 116s cap screws (2) • 108s-2 pins (2) • 107s-2 pin (1) • Washers (3) • E-clips (3)

Claris HG50 cassettes ensure a durable and low maintenance system that's easy-to-operate, with accurate and light-action shifting for Shimano 8-speed drivetrains. - Nickel plated finish for corrosion resistance - Steel lock ring - MODEL NO: CS-HG50-8 - SERIES: SHIMANO CLARIS R2000 Series - Compatible chain: CN-HG71 - Speeds: 8-speed - Type: HG

Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only

- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

The Claris group is a completely new development and covers a very broad range of use. It will equip fitness bikes, touring bikes, or even turn road bikes into genuine racers for entry-level road races. - Accurate brake control - Adjustable R50T5 brake shoe compound - Compatible with 28C tire - More than 30% greater brake performance as compared with the current brake caliper - Super SLR system compatible - Brake Pad Types : R50T2/R50T4 - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Position: Front - Brake Lever Actuation: Short Pull Super SLR - Pad Type: One Piece

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

Chris King Threadfit Bottom Bracket Conversions to mate your King ThreadFit BB to your chosen frame and crank spindle.

The Claris Rapidfire Plus shift/brake lever offers an elegantly integrated solution for braking and shifting 2x8 or 3x8 drivetrains. Its optical gear display lets you know what gear you're in, and the reach adjust brake lever allows you to dial in the brake lever ergonomics.

Shimano's Claris rear derailleur is a perfect replacement part or upgrade for 8-speed road drivetrains. HyperGlide technology results in smoother, faster shifting. - Maximum cog size: 32t (SS) / 34t (GS) - Total capacity: 37t (SS) / 43t (GS) - Pulleys: 11t - Chain compatibility: HG 8-speed

Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

Shimano Rapidfire Plus flatbar shift levers for road and fitness bikes. Compatible with 2x8 and 3x8 Claris R2000 components. The levers are also equipped with 2-Way Release for different riding styles or shifting (index finger or thumb) from various riding positions. The upper lever still performs the same function, but it swings both ways. Pull it with your finger or push it with your thumb—you choose. - Optical display to quickly see what gear you are in - Quick-adjust barrel for fine-tuning shifting

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - Devolution baseplates are a stainless steel solution that allow Chris King headsets to adapt to a wide variety of steerer tube sizes - 30.0mm for 1.5 lower bearing and 1 1/8" steerer

Connect your PC to CycleOps VirtualTraining.

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.