Your Search: "electronic shift"

The Elite Sealed Shift Kit uses a continuous liner that seals the system completely protecting it against dirt, mud and other contamination. Available in three colors, this system offers the ultimate combination of protection and low-friction performance. To ensure the best possible performance, we've paired Elite Polished Ultra-Slick inner cables with our improved Slick-Lube continuously-lubricated liners. This combination delivers precise cable movement and excellent durability. - The continuous liner running from the levers to the derailleur offers outstanding protection from dirt and debris - Elite Polished Ultra-Slick cables are paired with Slick-Lube liners to minimize friction - Lightweight XEX shift housing is nearly 30% lighter than traditional shift housing - 5.0mm shift housing and 1.9mm inner liner may not be compatible with all frames and components What's Included: - 1x 3200mm XEX Shift Housing - 2x 2300mm STS-EL Elite Polished Ultra-Slick Shift Inner Cables - 2x 2225mm Slick-Lube Liners - 2x LEX-SL 4mm Shift Housing Segments, 300mm - 4x Open Brass End Caps - 7x Open Alloy End Caps for 5mm Housing - 2x Open Alloy End Caps for 4mm Housing - 2x Pro Indexed Inline Adjusters (4mm/5mm) - 2x Housing Connectors (4mm/5mm) - 2x Cable Tips - 2x Grub Seals - 2x 5G Tube Tops - 2x Rotating Hooks

Jagwire's Lined End Caps are nice ferrules designed for the ends of shift cable housing sections. They feature a small nylon extension on the end that helps reduce friction and adds protection for coated cables, too. You get a bottle of 50 for all your bicycle setup needs.

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance. 2x Elite Link Shift Kits are spec'd for use on road or mountain bikes that use both a front and rear derailleur. The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - Ultra-slick polished inner cables minimize system friction - Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing - Includes enough housing and end caps for a bike with both a front and rear derailleur, with split (non-continuous) cable housing - Bikes with continuous housing and/or extra-large frames may need additional links and/or liners; service parts are available separately

- 4mm compressionless housing - Housing Length: 50m - Shift Housing Diameter: 4mm

KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body

Compatible with most Shimano drivetrains, microSHIFT thumb tap shifters have durable bodies with ergonomic shift levers that make it easy to get bikes going again. - Include shift cables - Visible gear indicator

MS-series twist shifters are quantity-tested, easy to use, and quick to setup. - Includes shift cable - Indexed left shifter works for double or triple

DS85 twist shifters are classic and simple to use, and give the ability to repair a variety of flat bar bikes and freshen their looks. - Include shift cables - Requires Campagnolo cable

Marvo LT shifters are smooth, simple, and easy to use. Compatible with Shimano 9-speed mountain derailleurs. - Trigger style shifting action - Straight cable entrance and exit routing reduce setup frustration - Includes shift cables - Visible gear indicator - Compatible with Shimano 9-speed mountain system - Left shifter works for double or triple

DS85 shifters feature a low-profile body, light and precise action, and an optical gear indicator for a more refined shifting experience. - Include shift cables - Low profile body is compatible with Campagnolo-style shift cables only - Visible Gear indicator - Compatible with Shimano mountain and road systems - Indexed left shifter works for double and triple

On the trail, the goal is to think about your shifting as little as possible. MicroSHIFT's Trail Trigger Pro features millimeter-perfect ergonomics to put the shift levers exactly where you want them, giving you quick thumb access without compromising your grip over rough terrain. Light lever action is paired with super positive indexing to make sure you never miss a shift. There's even an integrated silicone gripper on the lower lever to make sure thumb traction is fully optimized. - Compatible with microSHIFT ADVENT X 10-speed drivetrains only - Silicon gripper pad provides superior traction in all conditions - Internal cartridge bearings allow for light lever throw and positive actuation under load - Precise ergonomics put the shift lever where you want them

Compatible with Shimano mountain 11-speed derailleurs, XCD Xpress+ shifters are jam-packed with bearings for slick shifting action. The bearings are bikes' best friends, and when they meet with shifters, the result is minimal loss in transferring force from your fingertip into shift cables. - Trigger-style shifting action - Cold forged body for minimalistic design - 4 bearings for smooth shifting action - Includes shift cables - Compatible with Shimano 11-speed mountain systems

Imagination is the only limitation to how much the microSHIFT bar-end shifters can do. Their small, minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worries for mechanical issues. - Includes shift cables

Imagination is the only limitation to how much the microSHIFT bar-end shifters can do. Their small, minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worrying about mechanical issues. - Includes stainless slick shift cables - Index/friction switchable - Shift lever and bracket built with anodized, cold-forged aluminum - 19.0 - 22.0mm clamp band

Imagination is the only limitation to how much the microSHIFT thumbies can do. Their small minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worries for mechanical issues. - Convertible shifter can be switched between index and friction shifting - Compatible only with 9-Speed ADVENT

Imagination is the only limitation to how much the microSHIFT thumbies can do. Their small minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worrying about mechanical issues. - Indexed or friction mode-convertible rear shifter - Compatible with SRAM MTB systems - Shift lever and bracket built with anodized cold-forged aluminum - Includes stainless slick shift cables - 19.0 – 22.0mm clamp band

Imagination is the only limitation to how much the microSHIFT thumbies can do. Their small, minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worrying about mechanical issues. - Indexed or friction mode-convertible rear shifter - Indexed mode is compatible with Shimano mountain systems - Includes shift cable

Centos Xpress+ shifters are jam-packed with bearings for slick shifting action. The bearings are bikes' best friends, and when they meet with shifters, the result is minimal loss in transferring force from your fingertip into shift cables. - Cold forged body for minimalistic design - 4 bearings for smooth shifting action - Include shift cables

MicroSHIFT R10 Shimano-compatible 10-speed shifters feature comfortable ergonomics, easy installation, and durability you can rely on. - Dual control lever features an anodized forged aluminum brake lever and resin steel shift lever - Outer cable route design - Compatible with the Shimano 105 5700 / Tiagra 4600 10-speed road systems

R9 Xpress shifters are smooth, simple, and easy to use. - Compatible with Shimano 9-speed road and mountain derailleurs - Straight cable entrance and exit routing reduce setup frustration - Include shift cables

R11 Xpress+ shifters are jam-packed with bearings for slick shifting action. The bearings are bikes' best friends, and when they meet with shifters, the result is minimal loss in transferring force from your fingertip into shift cables. - Straight cable entrance and exit routing reduce setup frustration - Include shift cables - Visible gear indicator - Compatible with Shimano 11-speed road systems

Imagination is the only limitation to how much the microSHIFT thumbies can do. Their small minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worries for mechanical issues. - Includes shift cables - Indexed or friction mode-convertible rear shifter

Imagination is the only limitation to how much the microSHIFT thumbies can do. Their small, minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worrying about mechanical issues. - Includes shift cables - Indexed or friction mode-convertible rear shifter - Indexed mode is compatible with Shimano 10-speed mountain systems

M110 drop bar shifter levers allow for the use of a Shimano Shadow Plus 11-speed rear derailleur with road handlebars to create a drop bar 1x11 setup. They feature the same reliable, easy-to-use shift mechanism found on microSHIFT's R-Series shift levers. - Includes cable and housing - Separate dedicated lever for up- and down-shifts - Replaceable hood cover and face plate - External shift cable routing for low friction, smooth response and easy cable and housing replacement - Left lever has no shifter parts for a clean, dedicated 1x setup - Compatible 11-speed MTB rear derailleurs include Shimano DynaSys and microSHIFT XCD/XLE

Origin-8's Down Tube Shifter Adapter is perfect for mounting down tube style shift levers on a bicycle that doesn't have provisions on the frame for them. It's made of light and durable machined aluminum with an anodized finish and fits frames with 1 1/8- to 1 1/4-inch diameter down tubes. Mounting hardware and shims are included.

- Full UD carbon construction aero road handlebar - Flattened top section for aerodynamic advantage and enhanced comfort - Fully integrated internal cable routing - Compatible with all mechanical/hydraulic brake systems and mechanical/electronic shift systems - 270g weight in 420mm width - ISO-Road safety certified - Clamp Size: 31.8mm - Rise / Reach: 85mm - Upsweep / Drop: 130mm

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. The durable composite body features our iconic three-way wrench shape and prevents scratching of expensive components. Angled ends allow for safe installation and removal of Shimano Di2 E-tube EW-SD300; wires in tight spaces. Universal coin cell tool helps remove and install battery covers on SRAM AXS and other electronic accessories. - Compatible with Shimano Di2 E-tube, EW-SD300 wires (nominally 3 mm OD connector) - Not compatible with Shimano Di2 E-Tube EW-SD50 wires (nominally 5 mm OD connector) — use the Park Tool EWS-1

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. - Durable composite body is durable and prevents scratching of expensive components - Angled Shimano Di2 E-TUBE ends allow for both installation and removal in tight spaces - Universal coin cell tool helps remove and install battery covers on SRAM eTap

"Take the guesswork out of internal routing. The IR-1.3 speeds the installation of internally-routed cable, housing, electronic wiring and hydraulic hose into carbon fiber, titanium, and aluminum frames. The straightforward guide magnet system utilizes five long guide cables with unique fittings, which can be routed through the frame in a number of ways using the included guide magnet. Everything is neatly stored in a convenient compact case. A true time and frustration saver!??Includes five 188 cm (74"") guide cables with attached magnets and unique fittings: • Barbed adapter — Threads into the end of brake & shift cable housing as well as hydraulic brake hose • Rubber adapter — Securely holds electronic shifting wire such as Shimano® Di2, SRAM® RED® eTAP®, FSA® K-Force® WE®, and Campagnolo® EPS • Di2®-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® shift wire, and is perfectly sized to fit into frame holes as small as 6 mm • Di2® EW-SD300-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® EW-SD300 shift wire • Reverse-polarity magnet — Used in conjunction with any of the other guide cables - feeds into the opposite end and meets the leading cable in the middle, aiding in routing on frames with tricky interior shapes Also included: • Double-threaded barb — Securely attaches new housing or hydraulic hose to existing housing or hose, allowing for easy replacement without redoing the routing • Guide magnet — routes guide cables through the frame from the outside"

The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.

The Problem Solvers Downtube Shift Cable Adjusters replace your existing shift adjusters, or let you add integrated shifters to your current down tube shifter-equipped road bike. Made from durable plastic and stainless steel, these adjusters are built to last for countless miles on your road steed. - Sold as a pair - Comes with mounting hardware

The WCS Carbon Logic-E Rizer bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Rizer is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Rizer features Ritchey's proven WCS carbon technology in a 15mm-rise bar with a textured stem clamp area to reduce the risk of bar slippage. - Material: carbon fiber - Width: 780mm (cutting not recommended) - Rise: 15mm - Backsweep: 9° - Upsweep: 3° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 175g - Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing) - For proper assembly, stems with open faceplates are required, such as the Ritchey C220 Trail.

22.2mm shim kit to mount control levers. Slater bars are 19mm diameter. The shim kit allows for standard 22.2mm brake, shift and dropper post levers to be used.

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.

SRAM'S Jonnisnot Shifter Grease is a fluorocarbon lube perfect for steel-on-composite applications and for brake and shift cables. It minimizes friction and maximizes the performance of your components. You'll love the easy-to-use 20ml syringe container, too.

SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

SRAM's Ferrule Kit is just the thing to keep on hand for your brake- and shift-cable replacement and repairs. You get 10 4mm-diameter aluminum shift ferrules, 6 5mm-diameter aluminum brake ferrules, plus 3 aluminum cable crimps to prevent frayed cables.

SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift all of gears at once. These shifters are indexed to shift three front chainrings, and feature micro-adjustments to keep derailleur alignment perfect.

The newly redesigned Eagle AXS Rocker Paddle gives the rider a traditional, familiar interface for their cutting-edge electronic control. Effortless electronic shifting paired with a more traditional-feeling actuation makes for quick assimilation of riders who are new to AXS and provides another ergonomic option for those who have run AXS previously. The controller's functions are customizable through the AXS app, allowing you to assign any action to any button. With AXS, you can truly make your cockpit your own. - Customize in-board and outboard shift options - AXS-enabled components can be programmed and personalized using the SRAM AXS App.

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a SRAM or Shimano front derailleur. These shifters are indexed to shift three gears, and feature micro-adjustments for perfect front derailleur alignment.

- Complete ferrule and cable end kit - Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4) - Material: Aluminum

• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.

• Replacement locking handlebar grip sets for XX1 Grip Shift • includes one 100mm right and one 122mm left grip • Available in black or silver.

SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

SRAM's Centra Twist Shifters are simple to use, offer solid shifting, and reliable construction. They feature a large ergonomic grip section and SRAM's 1:1 actuation for solid shifts. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.

SRAM NX Grip Shift with X-ACTUATION™ technology gives you sharp, dependable shifting. Built for precise and swift shifting across our wide range 11-speed cassette, the NX Grip Shift brings industry changing technology to everyone. - SRAM 1x™ X-ACTUATION™ for precise and dependable 11-speed performance - SPEED METAL™ shift indexing - ROLLING THUNDER™ ball bearing technology - JAWS™ lock-on grip technology

Compatible with all other SRAM Eagle drivetrains, the SX Eagle Trigger Shifter keeps the promise of a simple shift. SX Eagle means easy, intuitive shifting every time for every rider.

SRAM's Centra Twist Shifters are simple to use and offer solid shifting and reliable construction. They feature a large ergonomic grip section and SRAM's 1:1 actuation for solid shifts. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

Designed for the most discerning, performance obsessed riders, SRAM's GX 2x11 Rear Grip Shifter features weight-saving construction and delivers outstanding speed and precision. SRAM's X-Actuation gives you precise and dependable 11-speed performance. This right-side rear shifter is compatible with SRAM's GX 11-speed derailleurs and cassettes. • Full metal, 11-speed indexing keeps shifting crisp and precise with Grip Shift • Three rows of ball bearings provide zero friction or play—reducing the force needed to shift and promoting long-term performance under all weather conditions with Grip Shift • Once the Grip Shift shifter and grip interlock securely, forged aluminum clamps on either end reinforce the assembly by locking tightly to handlebar • Weight: 144 grams

Designed for the most discerning, performance obsessed riders, SRAM's GX 2x11 Front Grip Shifter features weight-saving construction and delivers outstanding speed and precision. SRAM's X-Actuation gives you precise and dependable front 2-speed performance. This left-side front shifter is compatible with SRAM's GX 2x11-speed front derailleur. • Full metal, 2-speed indexing keeps shifting crisp and precise with Grip Shift • Three rows of ball bearings provide zero friction or play—reducing the force needed to shift and promoting long-term performance under all weather conditions with Grip Shift • Once the Grip Shift shifter and grip interlock securely, forged aluminum clamps on either end reinforce the assembly by locking tightly to handlebar • Weight: 144 grams

SRAM's PG-1130 11-Speed Cassette is constructed of heat-treated steel cogs and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick, positive gear changes. This excellent cassette also sports an aluminum spider construction for a maximum stiffness-to-weight ratio, a durable steel lockring, and comes in three wide ranges to suit your riding style.

SRAM's 1050 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.

SRAM's PG-1030 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette is available in four configurations perfect for riding off road, including one with a 36-tooth largest cog for super-easy climbing.

The SRAM NX X-HORIZON rear derailleur provides the same smooth, reliable shifting action as XX1—from the larger upper pulley offset to the 12-tooth X-SYNC pulley wheels. By eliminating unwanted chain movement, X-HORIZON shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. - X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - Fully compatible with all SRAM MTB 1x drivetrains - Most affordable fully featured 1x rear derailleur in the industry - Speeds: 11-speed - Weight: 322 grams - Color: Black - Compatibility: X-ACTUATION - Bearings: Steel - Cage Size: Long - Max Tooth: 42

SRAM's 1170 11-Speed Cassette is constructed of light, durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick, positive gear changes. This excellent cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in three ranges to suit all your riding.

The SRAM Rival 1 rear derailleur is engineered for smooth, reliable shifting action, delivering 100% of what you demand. By eliminating unwanted chain movement, X-HORIZON shifts faster, reducing shift effort and chain slap. - X-HORIZON design reduces shift force while eliminating ghost shifting and chain slap - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings and aluminum cage - Technologies: X-HORIZON, EXACT ACTUATION, X-SYNC, ROLLER BEARING CLUTCH, Cage Lock - Medium cage: 11-26 through 11-36 cassettes, 269g - Long cage: 10-42 cassette, 275 g

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls