Your Search: "valve adapter"

The Benno Utility Rear Rack #3 Plus is a direct fit to the Benno Boost E-bikes. The 66cm 18cm platform allows the use of up to 2 Yepp Easyfit Baby seats without adaptors. Integrated side loaders allow easier carrying of bulky items and provide a footrest option for older children. The rack is rated to carry up to 130lbs of kids, gear or any combination of both. - Max deck load 130lbs/60kg, Max side load 35lbs/15kg each side. Total load capacity 130lbs/60kg - Fits two Yepp® Easyfit baby seats without an adapter - Dimensions: Deck 18cm x 66cm (W x L) - Weight: 3240g

The Benno Utility Rear Rack #3 Plus is a direct fit to the Benno Boost E bikes. The 66cm 18cm platform allows the use of up to 2 Yepp Easyfit Baby seats without adaptors. Integrated side loaders allow easier carrying of bulky items and provide a footrest option for older children. The rack is rated to carry up to 130lbs of kids, gear or any combination of both. - Max deck load 130lbs/60kg, Max side load 35lbs/15kg each side. Total load capacity 130lbs/60kg - Fits two Yepp® Easyfit baby seats without adapter - Dimensions: Deck 18cm x 66cm (W x L) - Weight: 3240g

- Waterproof double bicycle bag including roll-top closure. - Equipped with integrated LED lighting (batteries sold separately). - Large capacity of 41 liters in total. - Includes pre-assembled MIK adapter plate and therefore easy to attach.

Benno Utility Rear Rack #1 Plus is a direct fit to the Benno Boost E bikes. The 66cm x 18cm platform allows the use of up to 2 Yepp Easyfit Baby seats without adaptor. The rack is rated to carry up to 130lbs of kids, gear, or any combination of both. - Dimensions: Deck 18cm x 66cm (W x L) - Max load 130lbs/60kg - Fits two Yepp Easyfit baby seats without adapter - Weight: 2300g - Fits Benno Boost E bikes

Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve

Thanks to the unique Seat-Lock attachment system, the Seat-Pack QR is quickly and securely mounted and just as speedily removed, completely residue-free. An adapter even enables the use of a dropper post, making the innovative Seat-Pack QR suitable for a variety of bikes. DETAILS Whether you're riding singletrack, mountain passes or gravel routes, with the waterproof Seat-Pack QR you are ready for every bike adventure. With the innovative and patented Seat-Lock attachment system and abrasion-resistant nylon fabric, the bag is super stable, quickly mounted and just as quickly removed without leaving any residue. And with the help of a special adapter of just 4.3 centimeter in width, this bag can even be used with a dropper post. The internal reinforcement and five compression straps ensure that the contents are packed tightly and securely. A valve with a handle strap helps to compress the pack volume, and the elastic cord on the outside allows for the attachment of additional gear. To prevent damage from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also doubles as a fender. OTHER PRACTICAL FEATURES: - Our reflector ensures added visibility and safety - A daisy chain allows for the attaching of a rear light COMPATIBILITY NOTICE YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE: 1. The saddle rails must have a bend of at least 34°. 2. The seat post clamp must be at least 13mm from the middle of the bend in the saddle rail. There must also be at least 13mm from the middle of the bend to where the rail connects to the back of the saddle. 3. The bottom edge of the saddle (at the side) must be at least 14mm higher than the bottom edge of the saddle rail.

- The waterproof double pannier is ideal for grocery shopping and cheerfully stands out with a sky blue color. - The bag has a zipper and an additional Velcro fastener. - It has reflectors on all sides to ensure you remain visible to other people when commuting in traffic. - A pre-assembled MIK adapter plate is included. - Bag Dimensions: 30x15x30cm

- Trendy design - Includes pre-assembled MIK adapter plate - Suitable for the MIK system carrier or carrier plates - Volume: 35L - Bag Dimensions in cm: 37x15x37 - Water-repellent

- Double bicycle bag, water-repellent polyester - Reflective stripes - Elastic bottle bands inside - Main compartment with pull cord - MIK system carriers/carrier plates, incl. MIK Adapter plate (70171) - 32L

The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.

Have you ever wondered why all Feedback Sports bike repair stands have exposed frame above the clamp head? Our Pro Truing Stand is designed to sit atop all of our portable stands! The truing stand also includes a free-standing steel base and a bench-mount adapter for when you're not traveling to races and top-secret trailheads. This single-arm, precision wheel and rotor truing stand is awesome at home and excels at races, events, or adventure-riding weekends. And with the all-new Thru-Axle Adapter, it can accommodate the most common wheel sizes for quick-release or thru-axle hub designs. Use the benchtop mount for an awesome tubeless setup and tubular gluing station. - All-New Thru-Axle Adapter accommodates: 10mm, 12mm, 15mm and 20mm – up to 157mm wide hubs (SuperBoost) - Single-arm design is lightweight, portable and compatible with most wheel systems - Precision spring-loaded tip can verify lateral and radial rollout - Measurement arm includes a disc brake rotor truing slot - Steel base measures 10.25 x 8.5-inches (26.5 x 21.5cm) and 5.8lbs (2.6kg) - Bench mount measures 4 x 6-inches (10.1 x 15.2cm) - Anodized 6061 T6 aluminum construction is ultralight, corrosion resistant and incredibly durable - Can accommodate up to 29-inch wheel with tire mounted - 9mm quick-release hubs use quick-release for mounting - 12mm, 15mm and 20mm thru-axle adapter included - 3-Year Warranty

An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower-profile air-release button allows fine tuning of tire pressure while preventing unintended pressure release. - Head: SmartHead DX3 w/ air release button & extra-long hose - Barrel: Painted steel - Gauge: 200 psi / 14 bar, Top mounted digital (Tolerance : < 100 psi ± 1 psi / > 100 psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 337cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushioned rubber for digital gauge protection, auto off, Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 73.5 x 25.5 x 16.4cm / 28.9" x 10" x 6.5" - Weight: 1.97kg / 4.34lb

Add a bit of function and fashion to your rear rack. - Fits 15" laptop - Attaches via hook and loop straps onto rear racks - Upgrade to MIK compatibility with MIK adapter plate

Vintage look, modern functionality. Compatible with MIK racks, this coated pinewood crate is ready for adventure no matter the season. Whether it's beach towels, books or beverages, Electra has got you and your stuff covered. Looks cool. Carries stuff. - Compatible with MIK rear racks / MIK adapter plate installed - All-weather satin clear coated pinewood - Iron branded Electra logo - MIK adapter plate installed - Carries up to 10kg (22lb) - Dimensions: 40cm (l) x 30cm (w) x 15cm (h) - Attachment: MIK - Includes hardware: Yes - Material: Pine Wood - Weight: 0.88kg

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

THIRST QUENCHER WITH THE BEST ATTITUDE GRADES Bottle holder with adapter for the handlebar What to do with the bike bottle if the bike frame - especially on e-bikes - doesn't have room for a cup holder? The bottle holder system COM/CAGE VELO guarantees an ideal solution for the cockpit. Especially on the handlebars, the bicycle bottle is easily accessible at all times and can be easily removed and reinserted for drinking. Compatible with the COMPIT system The system consists of an adapter and the proven SKS bottle cage VELOCAGE. It is compatible with the smartphone holders COMPIT (item no. 11533, 11534, and 11798) and COMPIT/E (item no. 11535, 11536, and 11799), but can also be used without a mobile phone holder. In this case, the attachment for mounting on e-bikes with a Bosch Intuvia display is included in the scope of delivery. - Compatible with the COMPIT system - Including adapter for attachment to the handlebar - Made in Germany - Weight: 62g

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

ALARMBOX 2.0 EFFECTIVE AND SECURE The ABUS Alarmbox 2.0 offers you a 2-in-1 alarm and locking system. The electronic device unleashes an intelligent, shock- and motion-sensitive alarm for your property - be it a bicycle, a barbecue or a tool. In addition, the housing of the Alarmbox can integrate further ABUS adapter chains or cables as accessories and thus secure further objects. The Alarmbox 2.0 can be easily attached to round tubes, for example on the bicycle frame, and secured by means of a key. A short, 5-second warning sounds in case of slight impacts or movements. In the event of a persistent theft attempt, the 100 dB loud alarm is triggered. When a thief is on the prowl, they want to attract as little attention as possible. But that's exactly where the portable alarm system throws a spanner in the works. - Alarm function with min. 100 dB for 15 seconds, followed by reactivation - 3D Position Detection - alarm system that detects vibrations and the smallest movements in all three dimensions, triggering the alarm - Smart alarm – the Alarmbox only emits a small warning beep in the event of minor and brief vibrations, e.g. if a football bounces nearby - CR2 batteries included - AlarmBox 2.0 can be mounted to a wide range of sizes of tubes - Compatible with ABUS adapter chains and cables

Quickly and efficiently take care of your aero hydration and computer holding needs with the Bontrager Speed Concept carbon Computer Cage. It allows bottle access while maintaining aero position and also incorporates an integrated bike computer mount. • Carbon fiber cage construction • Designed to be mounted to the Speed Concept Mono Extensions • Adjustable track mount system can mount to standard water bottle spacing and adjusted for perfect placement • Securely holds standard water bottles • Integrated computer mount will accept standard bar-mounted computer mounts • Adapter for SRM computer mounts included

The Session 8L bike hydration pack is a minimalist, yet full-featured pack combining the cooling comfort of a breathable back panel with airy shoulder straps. This narrow, lightweight pack features a 2-liter vertical hydration reservoir with a bite valve. The pack offers plenty of storage including an organized front pocket, a fleece-lined sunglass pocket, additional side pockets plus external attachment straps. The Session is a do-it-all bike pack to keep you out all day on the trails. - 2L / 70 oz Hydrapak reservoir - Phaser bite valve - Breathable Air Flow backpanel and shoulder straps - External attachment straps - Fleece-lined sunglass pocket - Internal organizer pockets - Safety light attachment - Integrated rescue whistle / sternum strap

EnergyPak Plus 200WH Accessories - With the removable connector cable, it’s easy to attach and remove the EnergyPak Plus 200WH - EnergyPak Plus 200WH accessories includes a battery cage, connector cable, charger adapter cable, fixed strap, cable holder, and cable strap - ENERGYPAK PLUS 200WH ACCESSORIES IS REQUIRED TO MOUNT ON THE BIKE & IS SOLD SEPARATELY - Some smartphones with Type C charging ports may not be compatible with the EnergyPak Plus 200

The Elite heart rate uses last generation wireless ANT+ and Bluetooth® Smart to synchronize your heart rate to the Elite My E-Training App and to all the compatible apps without the need of an adapter for your smartphone/tablet. Compatible Systems: - Compatible with iPhone 4s version and higher - Compatible with iPad 3 version and higher - Compatible with iPod Touch 5th generation and higher - Compatible with all the Android phones/tablets with 4.3 OS and higher and with 4.0 Bluetooth version - Compatible with all Bluetooth Smart Ready devices - Not compatible with Real Software. - Not compatible with console Supercrono Forte ANT+, Arion Digital ANT+, Qubo Digital ANT+. - Compatible with all the Elite home trainer only if used with My E-Training app or others app/software/ devices that support the Bluetooth Smart protocol - Replaceable battery and washable band

Bring along all your essentials with the minimalist Shuttle 6L bike hydration pack. This 2-liter hydration pack with a bite valve offers cooling comfort thanks to the breathable air mesh back panel and shoulder straps. Sunglasses stay protected in the fleece-lined pocket; quickly access your pump in the dedicated sleeve. The sternum strap offers the added bonus of a rescue whistle. The Shuttle 6L has a home for everything you need and nothing you don't. - 2L / 70oz Hydrapak reservoir - Phaser bite valve - Breathable air mesh back panel and shoulder straps - Fleece-lined sunglass pocket - Internal pump sleeve - Integrated rescue whistle/sternum strap

ADDITIONAL SECURITY Our popular ABUS frame lock adapter chain is now available with IvyTex technology.The innovative IvyTex cover is dirt and moisture repellent and even better: it helps to increase protection as the synthetic material slows the penetration of cutting tools. Underneath is a square profile chain made of hardened steel alloy. The chain can be connected to a number of ABUS frame locks and to the Alarmbox 2.0. It serves as additional security, for example to chain the bike to a fixed object with a pre-assembled frame lock. An additional key is not necessary for the plug-in chain. The key of the spoke lock opens and locks both components.The IvyTex connection chain is available in different lengths, chain link thicknesses and even colors. We have the right adapter chain for every city bike. Use and application: To secure the bike to a fixed object in combination with a frame lock or the Alarmbox 2.0 Technology and equipment: - Connection chain with IvyTex coating - Square profile chain made from our own hardened steel alloy - Durable IvyTex synthetic fiber shell offers resistance to sawing attacks - Hydrophobic IvyTex cover repels dirt and moisture - 6 & 8 mm hardened steel square chain - Fabric covering of the loop ring to protect against damage to the paintwork - With frame locks, there is no need to lock the shackle separately - Various connection options to fixed objects or several bicycles - Suitable for ABUS frame locks and alarm box 2.0

Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta 200 mounts on the saddle rails for no measurable drag. Our most popular single rear carrier includes Xlab's Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle. It mounts to most standard metal-rail saddles (for carbon rails, purchase the optional Delta Adapter). For a complete system, purchase the optional X-Strike Inflation Kit and store up to 4 CO2 cartridges.

A digital shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed-off so you can easily adjust your shock pressure. Digitally dialed Dialed suspension is crucial to a great ride. Upgrading to the Bontrager Digital Shock Pump will make it easy to dial-in front and rear suspension with confidence. It features a large, easy-to-read digital gauge that displays PSI/bar/kg/cm2, a bleed valve for fine-tuning pressure, and a thread-on design that quickly attaches for a reliable, secure connection. Product details: - Easy-to-read gauge accurately reads up to 300 PSI (20 bar) - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks - Displays PSI, bar, or kg/cm2 - Replaceable CR2023 battery Features: Easy-to-read digital gauge A broad, back-lit digital gauge provides accurate pressure readings to a maximum of 300psi (30 bar) Minimize connection bleed off Fast and secure connection minimizes bleed off when connecting and disconnecting Bleed valve to fine tune suspension The bleed valve allows you to release small amounts of pressure to fine tune your suspension to exactly where you want it Specs: - Pump type: Suspension - Valve: Schrader - Gauge type: Digital - Max pressure: 300psi - Frame mounted: No - Dimensions: 292mm (11.5") - Hose length: 25.4cm (10")

This basket is as sweet as honey. It's perfect for holding all your things, large and small. Easily attach and remove this MIK basket from your rear rack for added functionality and fun. You have things. We have things to hold those things. - Compatible with MIK rear racks / MIK adapter plate installed - Proprietary Electra design - Honeycomb patterned stamp - Powder-coated steel - Carries up to 9kg (20lb) - Dimensions: 34cm (l) x 23cm (w) x 27.5cm (h) - Attachment: MIK - Includes hardware: Yes - Weight: 1.02kg

WATERPROOF FORK BAG WITH ROLL-TOP CLOSURE FOR BIKEPACKING Fast, faster, Fork-Pack with Quick-Lock S adapter system. The all-new and innovative adapter system is ideal for attaching bags like the waterproof Fork-Pack to the fork of your bike. Weighing just 290 grams (including adapter), the fork pack offers approximately 4,1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30 mm to 42 mm. QLS bags are primarily designed for attachment to the fork, but can be attached to all vertical tubes using the accessories supplied. The Fork-Pack (205 grams) can easily and quickly be attached and removed from the adapter plate (85 grams) with just one hand in seconds. The nylon bag is abrasion-resistant, PVC-free and, of course, sustainably made in Germany. The maximum load is three kilograms / 6.6 lbs. Attention: Not suitable for mounting to carbon forks without "braze-on" eyelets, tapered fork blades or frame tubes

Made of abrasion-resistant Cordura fabric and weighing just 325 grams including the adapter, the Fork-Pack Plus offers 5.8 L of additional storage space for your next bike adventure. With the help of the Quick-Lock S adapter, this ultra-light bag with roll closure can be mounted on forks with mounts provided for this purpose, as well as on forks without accessory mounts, as long as the fork legs have an untapered diameter between 30 and 42 mm. The Fork-Pack Plus can be attached or removed from the mounted adapter plate single-handedly in a matter of seconds. The Fork-Pack is made of PVC-free nylon fabric and sustainably produced in Germany. - Reflective logo